Beadsmith Replacement Pins
For 1.8mm Metal Hole Punch Pliers
2-pack
- These replacement pins are sized for the BeadSmith's 1.8mm Metal Hole Punch Pliers (XTL-0069).
- TO REPLACE PIN:
- 1) Remove both nuts at the tip by turning them counter-clockwise. Use chain or flat nose pliers if needed to loosen nuts.
- 2) Remove the old pin and insert the new.
- 3) Replace the nuts, turning clockwise to fasten pin.
- Quantity: 2 Pins and 4 Nuts