Click or scroll to zoom
Tap or pinch to zoom
Retired - Vintage Button Cocktail Ring
Click or scroll to zoom
Tap or pinch to zoom
Retired - Vintage Button Cocktail Ring
Retired - Vintage Button Cocktail Ring

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Retired - Vintage Button Cocktail Ring

PROJECT R1016
Designer: Megan Milliken
Skill Level: Intermediate
Choose your favorite appropriately sized button from our 1/4 pound assortment of vintage metal buttons and create a fantastic and unique cocktail ring.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Your antique silver plated Nunn Design round bezel ring has an inner diameter of 20.5mm. Look through the vintage metal button assortment and find one that you like that is about 20mm and will fit in the bezel.
  2. Use a pair of flush cutters to clip the shank off of the button right up against the back of the button. Clip one side at a time. The shanks are hollow, and should be relatively easy to clip through.
  3. Press the cut edges flat using the side of a pair of chain nose pliers. Be careful, the cut edges may be sharp. Make sure the edges lie flat and don't stick up so that your button will sit flat in the bezel.
  4. Place a dab of E6000 glue into the ring bezel. Press the button into place and allow the glue to dry thoroughly.
  5. Allow the glue to dry completely before wearing.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PND-0199 - Assorted Vintage Metal Buttons Gold And Silver Tone 12-28mm Diameter - 1/4 Pound
    Project uses 1 piece. You will need 1 package.

  • FRG-0871 - Nunn Design Ant. Silver Plated Pewter Bezel Round Adjustable Ring Floral 28.5mm
    Project uses 1 piece. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 tube. You will need 1 package.

Additional Information
Theme Vintage Look
Ingredients PND-0199, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Assorted Vintage Metal Buttons Gold And Silver Tone 12-28mm Diameter - 1/4 Pound Variety Pack
Assorted Vintage Metal Buttons Gold And Silver Tone 12-28mm Diameter - 1/4 Pound Variety Pack
You will need 1 package(s).
1 package = 1/4 lb..
$6.59 / Package | SKU: PND-0199
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.09 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed