Blue Colette Bridesmaid Bracelet

What You'll Need

• 2 (1 package) - Silver Plated Wire & Thread Protectors .024 Inch Loops (50) (FCR-4165)


• 2 (1 package) - Silver Plated Round Beads 3mm (1000) (BMB-5130)


• 2' (1 package) - Soft Flex Best Beading Wire .014 Inch - 100 Ft (XCR-5141)


• 8 (1 package) - Fine Silver Plated Pewter Daisy Spacer Beads 4mm (x 50) (BMB-3215)


• 6 (2 packages) - Fine Silver Plated Pewter Leaf Bead Caps 5.7mm (x 4) (BMB-3269)


• 4 (1 package) - Silver Plated Curved Noodle Tube Beads 2mm x 38mm (12) (BMB-4072)


• 3 (1 package) - Swarovski Crystal #5601 6mm Cube Beads Air Blue Opal (4) (SWC-26094)


• 4 (1 package) - Swarovski Crystal 5328 4mm Bicone Beads Dark Indigo (50) (SWBB-14096)


• 1 (1 package) - Silver Plated Pewter Sleek Wrap Toggle Clasp 12mm (FCL-7033)


• 2 (1 package) - Beadalon Silver Plated Crimp Beads 1.3mm (95 Beads) (FCR-1210)

NOTE: Clicking the "Purchase All Supplies" button will order all of the above supplies. If you only need to purchase some of the items, please use the individual "Add" buttons above.

Tools You'll Need

• Bead Stopper- Stop Beads Sliding Off Stringing Material (XTL-3000)


• Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex (XTL-5600)


• Double Notch Crimping Pliers - Works on 2mm And 3mm Crimps (XTL-5230)


• Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose (XTL-5511)

Instructions:

1. Cut two 12" lengths of .014" Soft Flex beading wire.


2. Hold the two lengths together and attach a bead stopper 2-3" from one end.


3. With the two lengths of wire together, string one 3 mm silver plated round bead followed by two 4 mm silver plated daisy spacer beads.


4. Next, string one 2 mm x 38 mm silver plated curved noodle tube bead onto each of the lengths of wire.


5. Bring the lengths of wire together and string two daisy spacer beads.


6. Then, with the lengths together, string one 4 mm Swarovski Crystal bicone bead, one 5.7 mm silver plated leaf bead cap, one 6 mm air blue opal Swarovski Crystal cube bead, and another leaf bead cap. Make sure that the bead caps are strung with the wide side facing the cube bead.


7. Repeat step 6 three times, and then, with the lengths together, string one bicone bead and then two daisy spacer beads.


8. Next, string one 2 mm x 38 mm silver plated curved noodle tube bead onto each of the lengths of wire.


9. Bring the lengths back together and string two daisy spacer beads followed by one silver plated round bead.


10. String a 1.3 mm silver plated crimp bead onto the end of your bracelet, with the lengths together. Then use a .024" silver plated wire and thread protector to attach one side of the 12 mm silver plated toggle clasp. Bring the strands of wire back through the crimp bead and silver plated round bead and use chain nose pliers to pull tight. Secure with the crimp bead and trim the excess wire with flush cutters.


11. Carefully remove the bead stopper from the other end of your work. String a crimp bead onto the end, with the lengths together, and use another wire and thread protector to attach the other side of the toggle clasp. Bring the strands of wire back through the crimp bead and silver plated round bead and use chain nose pliers to pull tight. Secure with the crimp bead and trim the excess wire with flush cutters.