Taos Sunset Bracelet

Project B119
Designer: Andrea Morici

A lovely companion piece to our Taos Sunset necklace.

Enlarge Photo

What You'll Need Beadalon Beading Wire Bronze 7 Strand .015 Inch / 30Ft XCR-67563 BrandID:26 Project uses 10 inches.  You will need 1 package. 1 package = 1 Spool Price: $2.99 / pkg Quantity:    Red Agate Large Smooth Nugget Beads /24 Inch Strand (Heat Dyed) SPAG-53 BrandID:28 Project uses 4 pieces.  You will need 1 package. 1 package = 1 Strand Price: $7.99 / pkg Quantity:    Apatite Gemstone Chips Beads 5-10mm / 35 Inch Strand Deep Blue Green SPAP-01 BrandID:28 Project uses 15 pieces.  You will need 1 package. 1 package = 1 Strand Price: $8.99 / pkg Out of Stock Notify Me Find similar:  Apatite Real Copper Small Uniform Round Beads 3 mm (100) BMB-1836 BrandID:28 Project uses 20 pieces.  You will need 1 package. 1 package = 100 Pieces Price: $2.19 / pkg Quantity:    Antiqued Copper Plated Fluted Round Beads 5.5mm (72 Beads) BMB-5303 BrandID:28 Project uses 10 pieces.  You will need 1 package. 1 package = 72 Pieces Price: $6.25 / pkg Quantity:    Nunn Design Copper Plated Pewter Round Toggle Clasp Ring 11mm (1) FCL-7511 BrandID:98 Project uses 1 piece.  You will need 1 package. 1 package = 1 Piece Price: $2.19 / pkg Quantity:    Nunn Design Antiqued Copper Plated Leaf Toggle Clasp Bar 25mm (1) FCL-7503 BrandID:98 Project uses 1 piece.  You will need 1 package. 1 package = 1 Piece Price: $1.85 / pkg Quantity:    Bright Copper Crimp Beads 2mm x 1.2mm (100) FCR-1254 BrandID:28 Project uses 4 pieces.  You will need 1 package. 1 package = 100 Pieces Price: $1.75 / pkg Quantity:    Bright Copper Crimp Bead Covers 3mm (x50) FCR-1008 BrandID:28 Project uses 4 pieces.  You will need 1 package. 1 package = 50 Pieces Price: $1.99 / pkg Quantity:    Purchase All Supplies ★ Supplies For Project B119 - Taos Sunset Bracelet Includes all packages of items above and printed instructions. Recommended tools are not included. Price: $36.19 / kit Out of Stock Notify Me See more: Bracelet Project Tutorials

Instructions:

1. The finished length of this bracelet is roughly eight and one quarter inches long. If you'd like to adjust the length to make it either longer or shorter, you may omit or add 3mm copper beads from either end. Cut a piece of beading wire at ten inches long and secure one end with a Bead Stopper.


2. Onto the wire, thread the following:
   • a 3mm copper bead (BMB-1836)
   • a 5.5mm antique copper fluted bead
   • a 3mm copper bead (BMB-1836)
   • three apatite gemstone chips (SPAP-01)
   • a 3mm copper bead (BMB-1836)
   • a 5.5mm antique copper fluted bead
   • a 3mm copper bead (BMB-1836)
   • a large red agate nugget (SPAG-53)
   • a 3mm copper bead (BMB-1836)
   • a 5.5mm antique copper fluted bead
   • a 3mm copper bead (BMB-1836)
   • three apatite gemstone chips (SPAP-01)
   • a 3mm copper bead (BMB-1836)
   • a 5.5mm antique copper fluted bead
   • a 3mm copper bead (BMB-1836)
   • a large red agate nugget (SPAG-53)
   • a 3mm copper bead (BMB-1836)
   • a 5.5mm antique copper fluted bead
   • a 3mm copper bead (BMB-1836)
   • three apatite gemstone chips (SPAP-01)
   • a 3mm copper bead (BMB-1836)
   • a 5.5mm antique copper fluted bead
   • a 3mm copper bead (BMB-1836)
   • a large red agate nugget (SPAG-53)
   • a 3mm copper bead (BMB-1836)
   • a 5.5mm antique copper fluted bead
   • a 3mm copper bead (BMB-1836)
   • three apatite gemstone chips (SPAP-01)
   • a 3mm copper bead (BMB-1836)
   • a 5.5mm antique copper fluted bead
   • a 3mm copper bead (BMB-1836)
   • a large red agate nugget (SPAG-53)
   • a 3mm copper bead (BMB-1836)
   • a 5.5mm antique copper fluted bead
   • a 3mm copper bead (BMB-1836)
   • three apatite gemstone chips (SPAP-01)
   • a 3mm copper bead (BMB-1836)
   • a 5.5mm antique copper fluted bead
   • a 3mm copper bead (BMB-1836)


3. Thread two crimp tubes onto the end of your strand, but do not crimp them yet.


4. Thread the end of your strand through the loop on the round toggle clasp and back through the two crimp tubes. Crimp the tubes.


5. Remove the bead stopper from the opposite end and add two crimp tubes, but do not crimp them yet.


6. Thread the end of your strand through the loop on the leaf toggle bar and back through the two crimp tubes. Crimp the tubes.


7. Add a crimp cover over each of the four crimp tubes, and gently squeeze them closed. Trim off excess wire.

Tip: Check package quantities for each component. You may have extra material to make more than one finished project, or will have leftovers for other projects. In some cases, adding on just one more package of a component may be all you need to make multiple pieces.

 

• Aanraku
• Amate Studios
• Art Mechanique
• Artistic Wire
• Castin Craft
• Beadalon
• Beadelle
• Beadsmith
• Clay River Designs
• Crystal Clay
• DeCoRé
• E-6000
• Elegant Elements
• Eurotool
• Ezel
• Fireline
• G S Hypo Cement
• Golem Design Studio
• Green Girl Studios
• Griffin Silk
• ICE Resin
• Jablonex Czech Beads
• JBB Findings
• JudiKins
• Lacy's Stiff Stuff
• Laser-Expressions
• Lillypilly Designs
• Lindstrom Tools
• Lisa Pavelka
• McGill
• Miyuki
• Nunn Design
• Mod Podge
• Preciosa Crystal
• SilverSilk
• Sizzix
• Soft Flex
• Stretch Magic
• SWAROVSKI ELEMENTS
• TierraCast—sale!
• Tsukineko
• Toho
• Vintaj
• WigJig
• Wubbers
• Xuron

ABOUT SSL CERTIFICATES