Collapsible Butterfly Purse Hanger

What You'll Need

Error: Our database cannot find this item at this time. It may have been discontinued or is temporarily unavailable. Please refer to our "Printer Friendly" version above for an archived list of project components as a guide. [ID: 32618]

Nunn Design Collage Sheet Various Butterflies For Scrapbook - Fits Patera
XTL-9537 BrandID:98	Project uses 1 piece.  You will need 1 package. 1 package = 1 Piece Price: $3.80 / pkg	Quantity:
	Personalize: See more options »

Nunn Design Glue Adhesive 2 oz. - For Patera Findings (1)
XTL-1031 BrandID:98	Project uses 1 piece.  You will need 1 package. 1 package = 2 oz. Price: $13.45 / pkg	Quantity:

Nunn Design Sealant Protectant 2 oz. - For Patera Findings (1)
XTL-1032 BrandID:98	Project uses 1 piece.  You will need 1 package. 1 package = 2 oz. Price: $10.69 / pkg	Quantity:

Gel Du Soleil UV Epoxy Dimensional Gloss for Crafts & Jewelry 0.3 Fl. Oz.
XTL-1017 BrandID:6	Project uses 1 piece.  You will need 1 package. 1 package = 3 Fl. oz Price: $9.99 / pkg	Quantity:

Specialized Tools

Fiskars 5 Precision Tip Scissors - Super Sharp
XTL-5700 BrandID:20	Price: $4.99 / pkg	Quantity:

Lisa Pavelka Magic Gloss 9 watt UV Resin Curing Light
XTL-1510 BrandID:37	Price: $36.99 / pkg	Quantity:

Instructions:

1. Check out this video for a complete step-by-step video tutorial on making this pretty accessory!


2. Using a pair of scissors, cut out the large round butterfly on your collage sheet. Gently place it on top of the bezel setting attached to the purse hanger. You just want to make sure it will fit when you glue it and that you have an idea for the orientation of the image compared to the hook. If it looks a little big, gently trim it down.


3. Spread a layer of Nunn glue on the backside of your cut-out butterfly image, making sure the glue goes all the way to the edges. Flip over and press into the bezel setting. Let dry for 20 minutes.


4. Using a paint brush, paint on an even layer of Nunn Sealant over the top of the image, making sure to go all the way to the edges. Let dry for 20 minutes and then repeat with another layer of sealant. Let dry again and repeat with a 3rd layer of sealant. All these layers will help prevent any discoloration of your image when you add the resin on top.


5. After the sealer is completely dry, fill your bezel half way with Gel du Soliel UV resin. Let sit for a few minutes to see if any bubbles arise. If bubbles become present, carefully pop them with a sharp needle. Place into the UV light for 20 minutes.


6. Remove your purse hanger from the UV light and fill the bezel up to the top rim but not going over. After checking for bubbles, return to the UV light again for another 20 minutes.


7. Remove from the UV light and you now have 2 choices: you can be done and it looks great! OR if you want a slightly domed appearance, squeeze several drops of UV resin into the middle of your bezel, directly on top of your previous layers. You are going to need to have the surface tension work with you to help dome the resin. Keep adding drops to the middle until you have about a nickel size amount. At this point, use the tip of your UV resin bottle as an applicator to push the resin towards the sides of the round. Gently work your way around the circle, pushing the resin towards all the edges at an even rate. Less is more with this process, so start out slow. If you sense that you do not have enough resin, add a few more drops to the middle and continue to push outward. Do not add the drops to the edge.


8. Once you are happy with your doming, check for any bubbles, remove them, and CAREFULLY transfer to the UV light. When you carry it to the UV light, make sure to hold it completely level and not at a tilt, we don't want to spill the resin. Let cure in the UV light for 20 minutes.


9. Enjoy!