Speakeasy Necklace

What You'll Need

Art Deco Stamping Antiqued Silver Plated Rectangles 4 Hole Connector Link 32.2mm (1 1/4IN.)
FCO-7018 BrandID:28	Project uses 1 piece.  You will need 1 package. 1 package = 1 Piece Price: $2.25 / pkg	Quantity:

Antiqued Silver Plated Sleek Lobster Claw Clasps 15mm (6)
FCL-2540 BrandID:28	Project uses 1 piece.  You will need 1 package. 1 package = 6 Pieces Price: $3.50 / pkg	Quantity:

Rhodium Plated Pewter Open Oval Jump Rings 6mm 20 Gauge (50)
FJR-5405 BrandID:34	Project uses 12 pieces.  You will need 1 package. 1 package = 50 Pieces Price: $1.99 / pkg	Quantity:

Antiqued Silver Plated Flat Link Cable Chain 4.3mm Bulk By The Foot
CHA-9685 BrandID:28	Project uses 3 feet. This item is sold by the foot. Price: $1.79 / foot	Quantity:

Czech Cathedral 4x6mm Oval Glass Beads - 'Jet' Black / Silver Ends (25)
BCP-6306 BrandID:38	Project uses 3 pieces.  You will need 1 package. 1 package = 25 Pieces Price: $2.95 / pkg	Quantity:

Silver Plated Head Pins 1.5 Inches Long/21 Gauge (x50)
FHP-5323 BrandID:28	Project uses 3 pieces.  You will need 1 package. 1 package = 50 Pieces Price: $2.55 / pkg	Quantity:

Purchase All Supplies

★ Supplies For Project N228 - Speakeasy Necklace
	Includes all packages of items above and printed instructions. Recommended tools are not included. Price: $18.61 / kit	Quantity:
	See more: Necklace Project Tutorials

Specialized Tools

Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
XTL-5600 BrandID:7	Price: $13.75 / pkg	Quantity:

Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5511 BrandID:6	Price: $6.99 / pkg	Quantity:

Beadsmith Jewelry Fine Round Nose Micro Pliers
XTL-5514 BrandID:6	Price: $6.99 / pkg	Quantity:

Instructions:

1. Cut the following lengths of chain: cut two pieces at six inches long, two pieces at nine inches long, one at an inch and a half, one at two and a half inches long, and one at three and a half inches long.


2. Add an oval jump ring to each of the four loops on the antiqued silver art deco stamping. To each of the two top (vertical) jump rings, add one six inch piece of chain and one nine inch piece of chain. Close these jump rings again.


3. Create two short chains by linking together four (per chain) oval jump rings. Link one end of each jump ring chain to one end of each set of six and nine inch long chains.


4. Onto three head pins, thread a single Czech cathedral bead each. Create a simple loop on each head pin and trim off excess wire.


5. Open the loop on one of the head pin dangles and add it to the end of one of the jump ring chains, then close the loop again. Open the last jump ring on the other jump ring chain and add a lobster clasp. Close this jump ring again.


6. To the two jump rings at the bottom of the stamping, add both ends of the three short pieces of chain. Add the last two head pin dangles to the jump rings before closing once more.