Barbed Wire Heart Necklace

What You'll Need

SWAROVSKI ELEMENTS Crystal #6240 Wild Heart Pendant 27mm Jet (1)
SWBB-3737 BrandID:112	Project uses 1 piece.  You will need 1 package. 1 package = 1 Piece Price: $6.89 / pkg	Quantity:

Antiqued Silver Plated Stamping Deco Window Bead Wrap 62.5mm (1)
PND-5710 BrandID:28	Project uses 1 piece.  You will need 1 package. 1 package = 1 Piece Price: $1.69 / pkg	Quantity:

Tarnish Resistant Silver Color Copper Wire 20 Gauge 15 Yards (13.5 Meters)
WNT-2030 BrandID:6	Project uses 9 inches.  You will need 1 package. 1 package = 1 Spool Price: $5.99 / pkg	Quantity:

Matte Black Oxidized Plated Round Rolo Chain 3mm Bulk By The Foot
CHA-99986 BrandID:28	Project uses 2 feet. This item is sold by the foot. Price: $2.49 / foot	Quantity:

Black Finish Pewter Open Oval Jump Rings 6mm 20 Gauge (50)
FJR-6000 BrandID:34	Project uses 2 pieces.  You will need 1 package. 1 package = 50 Pieces Price: $1.65 / pkg	Quantity:

Black Finish Lead-Free Pewter 3/8 Inch Anna's Toggle Clasp (2)
FCL-7707 BrandID:34	Project uses 1 piece.  You will need 1 package. 1 package = 2 Pieces Price: $2.97 / pkg	Quantity:

Purchase All Supplies

★ Supplies For Project N541 - Barbed Wire Heart Necklace
	Includes all packages of items above and printed instructions. Recommended tools are not included. Price: $24.17 / kit	Quantity:
	See more: Necklace Project Tutorials

Specialized Tools

Wubbers Bail Making Jewelry Pliers - Medium 3mm & 5mm Size
XTL-0031 BrandID:53	Price: $28.99 / pkg	Quantity:

Instructions:

1. Carefully bend the silver plated filigree (PND-5710) piece in half using the 5mm side of a pair of bail making pliers (XTL-0031).


2. Insert the pointed end of the Swarovski Jet Black heart (SWBB-3737) down into the center of the bent filigree piece (see photo).


3. Cut 3 pieces of wire 2 and 1/4 inches in length each. Set aside.


4. Cut 3 pieces of wire 3/4 of an inch in length. You will use this for the "barb".


5. To make the barb, take the tip of a pair of round nose pliers and wrap the 3/4 of an inch wire around in opposite directions twice. The backside of the barb will have 3 wraps. You will make 3 barbs and set aside.


6. Now take one of the pieces of 2 and 1/4 inch wire and make a "U" shape by bending the wire in half. Slide on one of the "barbs" until it sits directly inside the "U". Take a pair of chain nose pliers and squeeze the very center of the barb to keep it in place.


7. Insert both ends of the wire through the doubled-up hole in the brass filigree piece above and to the right of the heart. (The "barb" will now be on the front of the pendant, it doesn't matter which side you choose to make the front).


8. Cross the two sides of the wire over each other in an "x" pattern and twist the wire twice (like a twist tie on a loaf of bread). This will be the back of the pendant. Bend the twisted wire over and hide it inside the hole that you just threaded it through. Repeat for the other side.


9. Take the last piece of wire with the barb and thread both wires through the hole of the heart. To secure the wire you will thread one of the pieces of wire up through the center of the filigree and out to one side. Bring the wire over the top of the filigree and back around to the back. You will anchor this piece of wire back through the center (please see photo for more detail) cut off excess wire. Repeat for the other side.


10. Cut the chain until it measures 18 inches in length. Thread it through the side of the filigree under the wires you placed on earlier (see photo).


11. Open one of the jump rings (FJR-6000). Link the jump ring through one of the end links of chain and the t-bar of the toggle clasp (FCL-7707). Close jump ring.


12. Open the other jump ring. Link the jump ring through the other end link of chain and the loop of the toggle clasp. Close jump ring. You're finished!