Good Earth Necklace and Earring Set

What You'll Need

Antiqued Copper Long Short Rope Textured Oval Chain 13.5mm - Bulk By The Foot
CHA-9946 BrandID:28	Project uses 2 feet. This item is sold by the foot. Price: $3.80 / foot	Quantity:

Czech Fire Polish Glass Beads 8mm Round Light Green Picasso Luster (25)
BCP-38149 BrandID:38	Project uses 8 pieces.  You will need 1 package. 1 package = 25 Pieces Price: $3.09 / pkg	Quantity:

Czech Glass Fluted Cathedral Beads 9mm Beige/Picasso (12 Beads)
BCP-39202 BrandID:38	Project uses 5 pieces.  You will need 1 package. 1 package = 12 Pieces Price: $2.49 / pkg	Quantity:

Antiqued Copper Plated Swivel Lobster Clasp 32mm (2)
FCL-8201 BrandID:28	Project uses 1 piece.  You will need 1 package. 1 package = 2 Pieces Price: $2.69 / pkg	Quantity:

Nunn Design Antiqued Copper Plated Pewter Open Jump Rings 8.5mm 16 Gauge (20)
FJR-2053 BrandID:98	Project uses 2 pieces.  You will need 1 package. 1 package = 20 Pieces Price: $2.89 / pkg	Quantity:

Antiqued Copper Ball Earring Hooks 19mm x24 (12 Pairs)
FEA-3053 BrandID:28	Project uses 2 pieces.  You will need 1 package. 1 package = 12 Pairs Price: $5.25 / pkg	Quantity:

Genuine Antiqued Copper TIny Uniform Round Beads 2mm (100)
BMB-1865 BrandID:28	Project uses 11 pieces.  You will need 1 package. 1 package = 100 Pieces Price: $2.49 / pkg	Quantity:

Genuine Antiqued Copper Head Pins 24 Gauge 2 Inches (24)
FHP-1052 BrandID:28	Project uses 11 pieces.  You will need 1 package. 1 package = 24 Pieces Price: $3.05 / pkg	Quantity:

Purchase All Supplies

★ Supplies For Project S100 - Good Earth Necklace and Earring Set
	Includes all packages of items above and printed instructions. Recommended tools are not included. Price: $29.55 / kit	Quantity:
	See more: Jewelry Sets Project Tutorials

Specialized Tools

Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
XTL-5600 BrandID:7	Price: $13.75 / pkg	Quantity:

Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-5511 BrandID:6	Price: $6.99 / pkg	Quantity:

Beadsmith Jewelry Fine Round Nose Micro Pliers
XTL-5514 BrandID:6	Price: $6.99 / pkg	Quantity:

Instructions:

1. Begin by removing (cutting off) two of the large twisted oval links from your two foot length of chain. Leave two of the smaller links attached to each large link. Set these aside to use later when making your earrings.


2. What should be left of your chain is seven large twisted oval links, with a chain of smaller links between and each and at either end.


3. Create six head pin dangles by threading first a 2mm antiqued copper bead and then a green Picasso luster Czech fire polish bead. Make the beginnings of a wrapped wire loop and set them aside.


4. Create three more head pin dangles by threading first a 2mm antiqued copper bead and then a 9mm beige Picasso fluted cathedral bead. Make the beginnings of a wrapped wire loop and set them aside.


5. Add three of these dangles; two of the green Picasso fire polish with one beige fluted cathedral bead between them, to each of the three central large twisted oval links, as pictured.


6. Finish the wrapped wire loop on each head pin dangle and trim off excess wire.


7. Add an antiqued copper jump ring to each end of your necklace. Before closing one of these jump rings, thread it through the swivel loop on your clasp.


8. To make the matching earrings, create two head pin dangles by threading on a 2mm antiqued copper bead, a 9mm beige Picasso fluted cathedral bead, and a green Picasso luster Czech fire polish bead. make the beginning of a wrapped wire loop on each, thread them onto their respective large twisted oval link, and finish wrapping the wire, trimming off excess when done.


9. Open the loop at the bottom of each earring hook the same way you would open a jump ring. Thread the loop through its respective link at the top of the chain segment before closing once more.