Retired - Alice In Wonderland Reversible Necklace

Retired - Alice In Wonderland Reversible Necklace
To quote from the storybook Alice In Wonderland, this necklace is 'curiouser and curiouser' with it's Swarovski rhinestone bedecked reversible sides. Whether you are fan of the story or just whimsy, this fun accessory will make you smile.
  • Project:N659
  • Skill Level:Intermediate
  • Designer:Julie Bean
OR

Related Video

Instructions

Note: You will need a paint brush for this project. Please make sure to clean your paint brush (with water is fine) between steps. You will also need a toothpick or small piece of wire to use as an applicator for this project.
  1. To begin, find 4 images that you like on your square sheet of Alice In Wonderland graphics. Two of the images you be using in their entirety (23mm square) and the other two you will be cutting down considerably. See photo. Cut out your images to fit the squares on your two Patera raised tag pendants.
  2. Using a paint brush, brush a layer of Mod Podge onto the backside of one of your 23mm images and place it into the raised square of the Patera 7/8" raised tag pendant. The image will be a little small for the bezel so scoot it up so that the paper edge lines up on the top and right hand sides. Press into place and let dry. Repeat this step with your other 23mm image on the other side of the Patera bezel (you might need to cut it down just slightly to fit). Once dry, paint a layer of Mod Podge onto the top side of each image, making sure to go all the way to the edges. Prop up your pendant so that nothing is touching the glue on either side while it dries. Once dry, paint another layer of Mod Podge over the first. Let dry.
  3. For your two smaller images that fit into the 1/2" Patera raised tag pendant link, spread glue on their backs and place them into their appropriate places on the pendant link. Press into place and let dry. See photo. Once dry, paint a layer of Mod Podge onto the top side of each image, making sure to go all the way to the edges. Prop up your pendant link so that nothing is touching the glue on either side while it dries. Once dry, paint another layer of Mod Podge over the first. Let dry.
  4. Please watch the video on How to Use BeadSmith's Magical Tray and Magical Pick Up Tool for Flatback Rhinestones. Following what you learned in the video, place your Swarovski flat back rhinestones in hematite and crystal golden shadow onto your raised tag pendants as seen in the photos. To get the rhinestones to stick to the metal, use a toothpick or small piece of wire as an applicator, and place small dabs of E6000 directly onto the metal. Then place your flatbacks into the glue. Let dry. Please feel free to place your rhinestones where ever you like, use the design in the photo as a guideline and follow it if you like, or go out on your own.
  5. At this time, also apply 3 flatback rhinestones to the round toggle clasp ring following the same method as above. Let dry.
  6. Open a 6mm black finish oval jump ring and connect your two bezel pendants together (the link and the pendant). Close the jump ring.
  7. Fold your chain in half and find the middle bubble chain link. Open a 6mm oval jump ring and connect it to this center chain link and also the loop at the top of your connected pendants. Close the jump ring.
  8. On one end of your chain, open and link a jump ring to the end chain link as well as the loop on your toggle bar which is shaped like a key. Close the jump ring. Go to the other side of your chain and link a jump ring to that end chain link and the loop connected to your toggle clasp ring. Close the jump ring.
  9. Enjoy!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • CHA-9987 - Antiqued Silver Plated Bubble Circle Chain 4.3mm - Bulk By The Foot
    Project uses 2 feet. You will need 2 packages.

  • FCL-7207 - Nunn Design Antiqued Silver Plated Key Toggle Clasp Bar 24mm
    Project uses 1 piece. You will need 1 package.

  • FCL-7509 - Nunn Design Silver Plated Pewter Round Toggle Clasp Ring 18.5mm (1)
    Project uses 1 piece. You will need 1 package.

  • FJR-6000 - TierraCast Black Finish Brass Open Oval Jump Rings 6mm 20 Gauge (50)
    Project uses 4 pieces. You will need 1 package.

  • PND-6626 -
    Project uses 1 piece. You will need 1 package.

  • PND-6716 - Nunn Design Antiqued Silver Plated Square Raised Tag Pendant Link 1/2 Inch
    Project uses 1 piece. You will need 1 package.

  • SWF-40915 - Swarovski Crystal, Round Flatback Rhinestone SS9 2.5mm, 72 Pieces, Hematite
    Project uses 23 pieces. You will need 1 package.

  • XTL-1047 - Mod Podge Matte All-In-One Decoupage Sealer / Glue / Finish (4 fl. oz. )
    Project uses 1 piece. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

  • XTL-9400 -
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-4004 - Beadsmith Magical Rhinestone Pick Up Tool With Cleaning Kit - Great For Placing Flatback Rhinestones

Additional Information

Additional Information

Project Type Necklace
Product Type Project
Technique Mixed Media
Designer Julie Bean
Skill Level Intermediate
Project Status Retired
Ingredients CHA-9987, FCL-7207, FCL-7509, FJR-6000, PND-6626, PND-6716, SWF-40915, XTL-1047, XTL-1054, XTL-9400

Purchase Project Bundle:

A supplies bundle is no longer available for this project, but you may purchase individual components separately below. Please review project instructions carefully—some items may no longer be available for this project.

or Purchase Supplies Separately:

Retired - Alice In Wonderland Reversible Necklace

Mod Podge Matte All-In-One Decoupage Sealer / Glue / Finish (4 fl. oz. )

You will need 1 package(s).

1 package = 4 fl. oz.

$5.25
 / package  | SKU: XTL-1047
Retired - Alice In Wonderland Reversible Necklace

Swarovski Crystal, Round Flatback Rhinestone SS9 2.5mm, 72 Pieces, Hematite

You will need 1 package(s).

1 package = 72 Pieces

$4.99
 / package  | SKU: SWF-40915
Retired - Alice In Wonderland Reversible Necklace

TierraCast Black Finish Brass Open Oval Jump Rings 6mm 20 Gauge (50)

You will need 1 package(s).

1 package = 50 Pieces

$1.65
 / package  | SKU: FJR-6000
Retired - Alice In Wonderland Reversible Necklace

Nunn Design Silver Plated Pewter Round Toggle Clasp Ring 18.5mm (1)

You will need 1 package(s).

1 package = 1 Piece

$2.19
 / package  | SKU: FCL-7509
Retired - Alice In Wonderland Reversible Necklace

Antiqued Silver Plated Bubble Circle Chain 4.3mm - Bulk By The Foot

You will need 2 package(s).

1 package = By The Foot

$4.49
 / package  | SKU: CHA-9987
Retired - Alice In Wonderland Reversible Necklace

Nunn Design Antiqued Silver Plated Square Raised Tag Pendant Link 1/2 Inch

You will need 1 package(s).

1 package = 1 Piece

Regular Price: $3.99

Special Price $2.00

 / package  | SKU: PND-6716
Retired - Alice In Wonderland Reversible Necklace

E6000 Industrial Strength Glue Adhesive (0.18 fl oz)

You will need 1 package(s).

1 package = 1 Piece

$1.75
 / package  | SKU: XTL-1054
Retired - Alice In Wonderland Reversible Necklace

Nunn Design Antiqued Silver Plated Key Toggle Clasp Bar 24mm

You will need 1 package(s).

1 package = 1 Piece

$1.85
 / package  | SKU: FCL-7207

Tools:

Retired - Alice In Wonderland Reversible Necklace

Fiskars 5 Precision Tip Scissors - Super Sharp

$4.99
 / package  | SKU: XTL-5700
Retired - Alice In Wonderland Reversible Necklace

Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

$6.99
 / package  | SKU: XTL-5511
Newsletter
Join us, for news, updates, special deals, discounts and everything beads.