Retired - 'Hope' Noodle Bead Wrap Bracelet

PROJECT B645
Designer: Julie Bean
Skill Level: Intermediate
This fun wrap bracelet uses colorful Miyuki delica beads combined with antique silver plated tube noodle beads to create a design that is hip and modern. A petite message charm has been added to the end of the adjustable clasp as a finishing touch.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This project is quick and easy to make! You can also wear it as a long necklace!
  1. Cut 46" of beading wire. Place a bead stopper 4 inches from one end.
  2. String onto your beading wire: 1 gunmetal crimp bead, 20 Miyuki delica 11/0 beads in galvanized matte dark mint green, and 1 Miyuki delica 10/0 bead in gun metal gray.
  3. Next, string 1 antique silver plated curved tube noodle bead, 1 Miyuki delica 10/0 bead in gun metal gray, 20 Miyuki delica 11/0 beads in galvanized matte dark mint green, and another Miyuki delica 10/0 bead in gun metal gray. Repeat this step another 16 times. On the last segment, replace the final Miyuki bead in gun metal with a gun metal crimp bead instead.
  4. String onto your beading wire 1 wire protector, loop your wire all the way through it. Now string 1 7mm gun metal closed jump ring and position it on the inside curve of your wire protector. Pull your wire protector (with jump ring inside) down to rest close to the crimp bead. Thread the wire through the crimp bead, going towards your beads. Pull snug and crimp the crimp bead. Snip off excess beading wire with your flush cutters.
  5. Go to the other side of your strung beads, remove the bead stopper, and repeat the previous step.
  6. Open a 4mm gun metal jump ring and link it to the 7mm jump ring you just attached as well as the loop at the base of your lobster clasp. Close the jump ring.
  7. On the other side of your bracelet, open another 4mm jump ring and link it to the 7mm jump ring already attached as well as a second 7mm jump ring. Close the 4mm jump ring. Open another 4mm jump ring and attach it to the 7mm jump ring you just attached and another 7mm jump ring. Close the jump ring. Open another 4mm jump ring and attach it to the 7mm jump ring you just attached as well as the loop at the top of your message charm. Close the jump ring.
  8. All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • DB-1171 - Miyuki Delica Seed Beads 11/0 Galvanized Matte Dark Mint Green DB1171 7.2 Grams
    Project uses 1 tube. You will need 1 package.

  • DBM-0001 - Miyuki Delica Seed Beads 10/0 - Gun Metal Gray - DBM0001 (8 Grams)
    Project uses 34 pieces. You will need 1 package.

  • BMB-5328 - Antiqued Silver Plated Curved Tube Noodle Beads 26mm (20 Beads)
    Project uses 17 pieces. You will need 1 package.

  • XCR-5193 - Soft Flex, 49 Strand Medium Beading Wire .019 Inch Thick, 30 Feet, Satin Silver
    Project uses 46 inches. You will need 1 package.

  • FJR-5294 - Gun Metal Plated Open Jump Rings 4mm 21 Gauge (100)
    Project uses 4 pieces. You will need 1 package.

  • FCR-4162 - Gunmetal Wire & Thread Protectors .019 Inch Loops (50)
    Project uses 2 pieces. You will need 1 package.

  • FJR-4076 - Gun Metal Plated Closed Jump Rings 7mm 18 Gauge (20)
    Project uses 4 pieces. You will need 1 package.

  • PND-5810 - Antiqued Silver Plated Rectangle Message Charms 'Hope' 21mm (2)
    Project uses 1 piece. You will need 1 package.

  • FCL-2511 - Gunmetal Plated Curved Lobster Clasps 8mm (10)
    Project uses 1 piece. You will need 1 package.

  • FCR-1253 - Gun Metal Brass Crimp Beads 2mm x 1.5mm (100)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5200 - Standard Size Beading Crimping Pliers (For 2x2mm & 2x1mm Crimp Beads)
  • XTL-3000 - Bead Stopper- Stop Beads Sliding Off Stringing Material
Additional Information
Theme Personalization
Ingredients DBM-0001, XCR-5193, FJR-5294, FCR-4162, FCL-2511, FCR-1253,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Miyuki Delica Seed Beads, 10/0 Size, Gun Metal Gray, DBM0001 (7.2 Grams)
You will need 1 package(s).
1 package = 8 Grams.
$4.30 / Package | SKU: DBM-0001
Soft Flex, 49 Strand Medium Beading Wire .019 Inch Thick, Satin Silver (30 Feet)
You will need 1 package(s).
1 package = 1 Spool.
$19.99 / Package | SKU: XCR-5193
You will need 1 package(s).
1 package = .
/ Package | SKU: FJR-5294
Gunmetal Wire & Thread Protectors .019 Inch Loops (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$2.49 / Package | SKU: FCR-4162
Lobster Clasps, Curve 10mm, Gunmetal Plated (10 Pieces)
You will need 1 package(s).
1 package = 10 Pieces.
$9.29 / Package | SKU: FCL-2511
Crimp Beads, 2x1.5mm, Gunmetal (100 Pieces)
You will need 1 package(s).
1 package = 100 Pieces.
$1.45 / Package | SKU: FCR-1253
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed