Retired - Luxe Wedding Hair Comb

Retired - Luxe Wedding Hair Comb
For your special day, wear a very special hair comb. Made with glistening Swarovski crystals and freshwater cultured pearls, this comb is both elegant and glamorous.
  • Project:H604
  • Skill Level:Advanced
  • Designer:Julie Bean
OR

Instructions

  1. Cut a 18 inch length of 24 gauge silver plated wire. Using your fingers, wrap one end of the wire 3 times around an end tooth of the comb, up at the top, as close to the crossbar as you can get. When you finish your wrapping, tug it slightly to make sure it holds.
  2. You want the wire to be sticking out the back concave side of the comb. If it is not currently sticking out the back, just wrap it around the nearest side of the comb to make it do so. Thread onto your wire:
  3. 1 silver plated 2.5mm round bead
  4. 1 bead cap
  5. 1 pearl
  6. another bead cap
  7. 1 2.5mm silver plated bead
  8. 1 Swarovski 4mm bicone
  9. Repeat 2 more times but on the last one, leave off the Swarovski Bicone. With your wire positioned downward in front of your comb crossbar, hold the beads so that they don't slip under the crossbar, and pull the wire through the space between the 3rd and 4th tooth. Pull to the back side. Loop the wire one more time up and over the crossbar and back down under the same space and through to the back (this will help stabilize your beads).
  10. Take your wire which is now sticking out the back side of the comb and wrap it around the top part of the 5th tooth of the comb. Make a complete wrap so that your wire is now sticking out the front side. Thread onto the wire:
  11. 1 2.5mm silver plated bead
  12. 1 Swarovski 4mm bicone
  13. another silver plated bead
  14. 1 bead cap
  15. 1 pearl
  16. 1 bead cap
  17. Repeat this same pattern 3 times. Next, thread onto the wire:
  18. 1 silver bead
  19. 1 Swarovski bicone
  20. and 1 silver bead
  21. With your wire positioned downward in front of your comb crossbar, hold the beads so that they don't slip under the crossbar, and pull the wire through the space between the 11th and 12th tooth. Pull to the back side. Loop the wire one more time up and over the crossbar and back down under the same space and through to the back.
  22. Take your wire which is now sticking out the back side of the comb and wrap it around the top part of the 12th tooth of the comb. Make a complete wrap so that your wire is now sticking out the front side. Thread onto the wire:
  23. 1 silver plated 2.5mm round bead
  24. 1 bead cap
  25. 1 pearl
  26. another bead cap
  27. 1 2.5mm silver plated bead
  28. 1 Swarovski 4mm bicone
  29. Repeat 2 more times but on the last one, leave off the Swarovski Bicone. With your wire positioned downward in front of your comb crossbar, hold the beads so that they don't slip under the crossbar, and pull the wire through the space between the 15th and 16th tooth. Pull to the back side. Loop the wire one more time up and over the crossbar and back down under the same space and through to the back.
  30. Now twist the end of your wire once around the 16th tooth of the hair comb. Loop your wire up and over and around the crossbar several times at discrete places, pulling tight, until you reach the space between the 8th and 9th teeth. Wrap the wire up and over the crossbar once in this area and then pull the wire so that it is sticking upright, away from your teeth. Thread onto your wire:
  31. 1 silver plated 2.5mm round bead
  32. 1 bead cap
  33. 1 pearl
  34. another bead cap
  35. 1 2.5mm silver plated bead
  36. 1 Swarovski 4mm bicone
  37. Repeat 2 more times but on the last one, leave off the Swarovski Bicone. With your wire positioned downward in front of your comb crossbar, hold the beads so that they don't slip under the crossbar, and pull the wire through the same space between the 8th and 9th tooth. Pull to the back side. Loop the wire one more time up and over the crossbar and back down under the same space and through to the back.Pull the wire back down towards the teeth and wrap it 3 times around the top part of the 8th or 9th tooth. Cut off excess wire with flush cutters.
  38. Cut a 12 inch length of 24 gauge silver plated wire. Using your fingers, wrap one end of the wire 3 times around an end tooth of the comb, up at the top, as close to the crossbar as you can get. When you finish your wrapping, tug it slightly to make sure it holds. Pull the wire so that it is sticking out of the back side, up and away from the teeth. Pull up and over the crossbar so that it comes to the front.
  39. Thread onto the wire: 1 bead cap. Next thread the following sequence 6 times:
  40. 1 2.5mm silver plated round bead
  41. 1 bead cap
  42. 1 pearl
  43. 1 bead cap
  44. When finished, thread one more silver plated round bead and another bead cap. Position your beaded strand directly in front of the crossbar. At the every end of the crossbar, pull your wire over the edge and around the backside of the end beaded loop. This is on top of the crossbar. Pull your wire through the looped archway, over the beaded strand that is in front of the crossbar, down through a space between two teeth, under the crossbar, and pulled to the backside. Repeat this same action 3 or 4 more times along the length of the crossbar so that you are securing your front beaded strand to the comb. When you get to the end, wrap your wire 3 times around the top part of the end tooth. Cut off excess wire.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FCO-9011 - Silver Plated Fancy Hair Combs - Fun Craft Beading Project 2 1/2 Inches (2)
    Project uses 2 pieces. You will need 1 package.

  • WCR-2430 - Artistic Wire, Silver Plated Craft Wire 24 Gauge Thick, 10 Yard Spool, Tarnish Resistant Silver
    Project uses 18 inches. You will need 1 package.

  • BMB-6453 - Bright Silver Plated Open Petal Flower Bead Caps 7mm (50)
    Project uses 76 pieces. You will need 2 packages.

  • PEW-1015 - White Freshwater Cultured Nugget Pearls 7-9mm / 16 Inch Strand
    Project uses 38 pieces. You will need 1 package.

  • BMB-5125 - Silver Plated Round Beads 2.5mm (1000)
    Project uses 76 pieces. You will need 1 package.

  • SWBI-1409 - Swarovski Crystal, 5328 Bicone Beads 4mm, 24 Pieces, Crystal Moonlight
    Project uses 20 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex

Additional Information

Additional Information

Project Type Hair Adornment
Product Type Project
Technique Wire Wrapping
Project Theme Bridal, Special Occasion
Designer Julie Bean
Skill Level Advanced
Project Status Retired
Ingredients BMB-5125, BMB-6453, FCO-9011, PEW-1015, SWBI-1409, WCR-2430

Purchase Project Bundle:

A supplies bundle is no longer available for this project, but you may purchase individual components separately below. Please review project instructions carefully—some items may no longer be available for this project.

or Purchase Supplies Separately:

Retired - Luxe Wedding Hair Comb

Silver Plated Round Beads 2.5mm (1000)

You will need 1 package(s).

1 package = 1000 Pieces

Regular Price: $14.99

Special Price $11.24

 / package  | SKU: BMB-5125
Retired - Luxe Wedding Hair Comb

White Freshwater Cultured Nugget Pearls 7-9mm / 16 Inch Strand

You will need 1 package(s).

1 package = 1 Strand

Regular Price: $3.49

Special Price $2.62

 / package  | SKU: PEW-1015

Out of stock

Retired - Luxe Wedding Hair Comb

Artistic Wire, Silver Plated Craft Wire 24 Gauge Thick, 10 Yard Spool, Tarnish Resistant Silver

You will need 1 package(s).

1 package = 1 Spool

Regular Price: $4.99

Special Price $3.74

 / package  | SKU: WCR-2430
Retired - Luxe Wedding Hair Comb

Swarovski Crystal, #5328 Bicone Beads 4mm, 24 Pieces, Crystal Moonlight

You will need 1 package(s).

1 package = 24 Pieces

Regular Price: $2.40

Special Price $1.80

 / package  | SKU: SWBI-1409

Out of stock

Retired - Luxe Wedding Hair Comb

Bright Silver Plated Open Petal Flower Bead Caps 7mm (50)

You will need 2 package(s).

1 package = 50 Pieces

Regular Price: $1.75

Special Price $1.31

 / package  | SKU: BMB-6453

Out of stock

Retired - Luxe Wedding Hair Comb

Silver Plated Fancy Hair Combs - Fun Craft Beading Project 2 1/2 Inches (2)

You will need 1 package(s).

1 package = 2 Pieces

Regular Price: $2.99

Special Price $2.24

 / package  | SKU: FCO-9011

Tools:

Retired - Luxe Wedding Hair Comb

Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex

Regular Price: $13.75

Special Price $10.31

 / package  | SKU: XTL-5600

Out of stock

Newsletter
Join us, for news, updates, special deals, discounts and everything beads.