Noodle Bead Faux Wrap Bracelet in Turquoise

PROJECT B1058
Designer: Megan Milliken
Skill Level: Intermediate
This bracelet is on trend, and quick and easy to make. Turquoise waxed cotton cord with gold plated noodle beads and findings make it a colorful addition to your wardrobe.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This bracelet measures about 6.5" long. To add or subtract from the finished length, simply adjust the length of your waxed cotton cord pieces.
  1. Cut five 6" pieces of turquoise waxed cotton cord. I used a pair of flush cutters to get a nice clean cut.
  2. Group your cords together with the ends even and apply some E6000 glue to the ends, then fit them into a 22k gold plated cord end for 4mm cord. Push them all the way in and then clean off any excess glue. Allow the glue to dry before continuing.
  3. Slide a 3 x 50mm 22k gold plated curved noodle bead onto each cord.
  4. Attach the loose ends into a second cord end in the same manner as you did the first. Allow the glue to dry before continuing.
  5. Use a 4mm, 22 gauge 22k gold plated jump ring to attach each cord end to one side of a 22k gold plated magnetic clasp.
  6. Allow all glue to dry thoroughly before wearing.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • BMB-4075 - 22K Gold Plated Long Curved Noodle Tube Beads 3mm x 50mm (10)
    Project uses 5 pieces. You will need 1 package.

  • FCR-1605 - Beadsmith Gold Plated Barrel Cord Ends With Ring 10mm Long - Fits Up To 4mm Cord (4)
    Project uses 2 pieces. You will need 1 package.

  • FJR-3914 - 22K Gold Plated Open Jump Rings 4mm 20 Gauge 22k Gold Plated (100)
    Project uses 2 pieces. You will need 1 package.

  • FCL-6807 - 22K Gold Plated Magnetic Clasps 6 x 4.5mm (4 Sets)
    Project uses 1 piece. You will need 1 package.

  • XCR-4305 - Waxed Cotton Cord 1.5mm Round - Turquoise (5 Meters/16.5 Feet)
    Project uses 30 inches. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 tube. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
Additional Information
Ingredients BMB-4075, FCR-1605, FJR-3914, FCL-6807, XCR-4305, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.
22K Gold Plated Long Curved Noodle Tube Beads 3mm x 50mm (10 pcs)
You will need 1 package(s).
1 package = 10 Pieces.
$6.89 / Package | SKU: BMB-4075
The Beadsmith Cord Ends, Barrel with Ring 10mm, Fits up to 4mm Cord, Gold Plated (4 Pieces)
You will need 1 package(s).
1 package = 4 Pieces.
$2.97 / Package | SKU: FCR-1605
22K Gold Plated Open Jump Rings 4mm 20 Gauge 22k Gold Plated (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$4.05 / Package | SKU: FJR-3914
Magnetic Clasps, Round 6x4.5mm, 22K Gold Plated (1 Set)
You will need 1 package(s).
1 package = 1 Set.
$1.19 / Package | SKU: FCL-6807
Waxed Cotton Cord 1.5mm Round - Turquoise (25 Meters/82 Feet)
You will need 1 package(s).
1 package = 25 Meters.
$4.64 / Package | SKU: XCR-4305
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.09 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed