Retired - Barme Earrings

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Please watch the video: How to Make a Wire Wrapped Gods Eye. Using what you have learned in the video, begin by creating your 20 gauge wire frame and attach your 15 inch length of 24 gauge wire at the center for wrapping the design, as shown in the video.
2. Wrap 8 layers of wire onto each of the 4 quadrants of your Gods Eye as shown in the video, but you will not be adding beads. Coil and clip the extra wire (see photo for reference).
3. String 1 Czech glass silver bead onto each of the 4 points of your 20 gauge wire frame, and make simple wire loops on the ends of the wires as shown in the video.
4. Attach your tassel and earring hook as shown in the video. Enjoy your earrings!

• FEA-6702 - 22K Gold Plated Earring Hooks Kidney Wires 25mm (10 Pairs)
  Project uses 2 pieces. You will need 1 package.


• WCR-2430 - Artistic Wire, Silver Plated Craft Wire 24 Gauge Thick, 10 Yard Spool, Tarnish Resistant Silver
  Project uses 30 inches. You will need 1 package.


• WCR-2033 - Artistic Wire, Copper Craft Wire 20 Gauge Thick, 6 Yard Spool, Tarnish Resistant Brass
  Project uses 12 inches. You will need 1 package.


• BCP-3307 - Czech Fire Polished Glass Beads 3mm Round Silver Metallic (50)
  Project uses 8 pieces. You will need 1 package.


• PTS-113 - Nylon Cord Pendant, Tassel with Gold Tone Open Jump Ring 30mm, 10 Pieces, Old Rose
  Project uses 2 pieces. You will need 1 package.

• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex