Dancing Sun Earrings

PROJECT E2150
Designer: Kat Silvia
Skill Level: Intermediate
Perfectly Bohemian, these dancing sun pendants shimmer with the shine of their natural brass coming through a deco motif embossing.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below you will make one earring. Repeat all instructions to make the second earring.
  1. Please watch our video: How to Use the Vintaj BIGkick with Etching and Embossing Dies.
  2. From what you learned in the video, place the sun stamping into the die. Choose the section of the die that you would like to emboss on the sun. I used a section just above center of the die (see photo for reference).
  3. Run it through the machine. Remove the stamping from the die.
  4. Use the Vintaj Relief Block on both sides of the stamping to bring out the shiny brass.
  5. Take on eye pin and string on one sea glass nugget bead. Make a simple wire loop, that faces the opposite way of the other loop.
  6. Open the one side of the eye pin, same as you would a jump ring, and attach it to the sun stamping. Close the loop.
  7. Move to the other side of the eye pin. Open the loop and attach one earring hook. Close the loop and you're all done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FEA-3700 - Vintaj Natural Brass, Round Ear Wire 30mm, 4 Pieces
    Project uses 2 pieces. You will need 1 package.

  • BGL-9932 - Cultured Sea Glass, Small Nugget Beads 8-16mm, 7 Pieces, Teal Blue
    Project uses 2 pieces. You will need 1 package.

  • PND-7225 - Vintaj Natural Brass Altered Blank Stamping Dancing Sun Pendant 33mm (1)
    Project uses 2 pieces. You will need 2 packages.

  • FHP-5526 - Vintaj Natural Brass Open Eye Pins 21 Gauge 1.5 Inches (20)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-1206 - Vintaj DecoEmboss Die For Sizzix Bigkick Machine - Deco Motif
  • XTL-2222 - Vintaj Metal Relief Block For Filing, Buffing & Sanding
  • XTL-1200 - Sizzix BIGkick Die Cut Machine - Vintaj Special Edition - Cut, Emboss, And Etch!
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Theme Summer, Boho
Ingredients FEA-3700, BGL-9932, PND-7225, FHP-5526,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.
Vintaj Natural Brass, Round Ear Wire 30mm (2 Pairs)
You will need 1 package(s).
1 package = 2 Pairs.
$2.49 / Package | SKU: FEA-3700
Cultured Sea Glass, Small Nugget Beads 8-16mm, Teal Blue (7 Pieces)
You will need 1 package(s).
1 package = 1 Strand.
$2.59 / Package | SKU: BGL-9932
Vintaj Natural Brass Altered Blank Stamping Dancing Sun Pendant 33mm (1 pcs)
You will need 2 package(s).
1 package = 1 Piece.
$1.99 / Package | SKU: PND-7225
Vintaj Natural Brass Head Pin, 1.5 Inches Long and 21 Gauge Thick (20 Pieces)
You will need 1 package(s).
1 package = 20 Pieces.
$2.97 / Package | SKU: FHP-5526
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Vintaj Metal Relief Block For Filing, Buffing & Sanding
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.29 / Package | SKU: XTL-5514
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed