Retired - Delicate Sterling Saucer Necklace

PROJECT N1067
Designer: Megan Milliken
Skill Level: Beginner
This petite necklace will give a nice subtle shine to your favorite everyday look with the elegance of sterling silver. It's also a versatile piece for layering.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

If your Super Lon cord is too curly, try wetting it and running it through your fingers to straighten it as it dries.
  1. Cut a 20" length of black Super Lon cord.
  2. Place one end into a sterling silver crimp bead with loop. The end of the cord can extend just outside the top of the crimp bead. Crimp the bead and carefully trim the excess cord with flush cutters, being sure you don't cut through the loop.
  3. Coat the free end of your cord in gum arabic beading glue and allow it to dry. Trim the very tip if necessary to get a nice clean point.
  4. Tie a knot 7" from the crimp bead that you've attached to your cord. Then string 16 sterling silver small rounded saucer beads.
  5. Tie a second knot just after the saucer beads.
  6. Measure 7" from your second knot and attach the other crimp bead at this point. Crimp and trim the excess cord.
  7. Open the loop on a sterling silver spring ring clasp the same way you would open a jump ring and attach it to one of the crimp bead loops; close the loop.
  8. Close your necklace by fastening the clasp to the other crimp bead loop.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • BMB-05026 - Sterling Silver Small Rounded Saucer Beads 4.5mm (8)
    Project uses 16 pieces. You will need 2 packages.

  • XCR-4236 - BeadSmith Super-Lon Cord - Size 18 Twisted Nylon - Black / 77 Yard Spool
    Project uses 18 inches. You will need 1 package.

  • FCL-01050 - Sterling Silver Spring Ring Round Clasps Open Ring 5mm (10)
    Project uses 1 piece. You will need 1 package.

  • FCR-2319 - Sterling Silver Cord Ends / Crimp Beads With Loop 1.7mm x 2mm - 1mm Hole(10)
    Project uses 2 pieces. You will need 1 package.

  • XCR-9803 - Henriettas Gum Arabic Glue for Beading/Quilting/Crafting Knots
    Project uses 1 jar. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5230 - Double Notch Crimping Pliers - Works on 2mm And 3mm Crimps
Additional Information
Ingredients XCR-4236, FCL-01050, FCR-2319, XCR-9803,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Super-Lon, S-Lon, Cord - Size 18 Twisted Nylon - Black / 77 Yard Spool
You will need 1 package(s).
1 package = 1 Spool.
$4.77 / Package | SKU: XCR-4236
Spring Ring Clasps, Round with Open Ring 5mm, Sterling Silver (10 Pieces)
You will need 1 package(s).
1 package = 10 Pieces.
$4.35 / Package | SKU: FCL-01050
Cord Ends, Crimp Beads with Loop 2x1.7mm, Sterling Silver (10 Pieces)
You will need 1 package(s).
1 package = 10 Pieces.
$2.69 / Package | SKU: FCR-2319
Henriettas Gum Arabic Glue for Beading/Quilting/Crafting Knots
You will need 1 package(s).
1 package = 1 Piece.
$8.99 / Package | SKU: XCR-9803
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

/ Package | SKU: XTL-5700
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Double Notch Crimping Pliers - Works on 2mm And 3mm Crimps

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed