Click or scroll to zoom
Tap or pinch to zoom
Retired - Emerald City Cuff
Click or scroll to zoom
Tap or pinch to zoom
Retired - Emerald City Cuff
Retired - Emerald City Cuff

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Retired - Emerald City Cuff

PROJECT B2135
Designer: Kat Silvia
Skill Level: Intermediate
This custom geometric cuff bracelet will never lose its sparkle, thanks to the permanent adhesive and sealer, Diamond Glaze. Just mix with your favorite color of fine glitter and you have got a 'glitter paint' that won't rub off.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

You will also need blue painter's tape, a mixing container, and a paint brush for this project. This is a free form project. You can use the photo for reference.
  1. For this project please watch our video: How to Use Diamond Glaze with Glitter for a Permanent Adhesive.
  2. Using your blue painter's tape and scissors, make a custom geometric pattern on the outer side of the brass cuff.
  3. From what you learned in this video, mix your green glitter and the Diamond Glaze to your liking. Paint it on to the cuff.
  4. Let dry for 10 minutes. Carefully remove the tape.
  5. Mix the gold glitter and the Diamond Glaze. Paint it on to the open spaces where the tape was. Let dry.
  6. If you would like, add a clean layer of Diamond Glaze over the top of the cuff and let dry.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • JB-2571 - Solid Brass Flat Cuff Bracelet Base 19mm (0.75 Inch) Wide (1 Piece)
    Project uses 1 piece. You will need 1 package.

  • XTL-1187 - Art Glitter, Ultrafine Opaque Glitter, 11 Gram Container, Bright Gold
    Project uses 1 piece. You will need 1 package.

  • XTL-1173 - Art Glitter, Ultrafine Opaque Glitter, 11 Gram Container, Emerald
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-1020 - JudiKins Diamond Glaze Water Based Adhesive (2 Fl. Oz.)
  • XTL-5700 - Fiskars 5 Precision Tip Scissors - Super Sharp
Additional Information
Ingredients JB-2571,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
The Beadsmith Solid Brass Flat Cuff Bracelet Base 19mm (0.75 Inch) Wide (1 Piece)
The Beadsmith Solid Brass Flat Cuff Bracelet Base 19mm (0.75 Inch) Wide (1 Piece)
You will need 1 package(s).
1 package = 1 Piece.
$4.57 / Package | SKU: JB-2571
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

JudiKins Diamond Glaze Water Based Adhesive (2 Fl. Oz.)
JudiKins Diamond Glaze Water Based Adhesive (2 Fl. Oz.)
$10.99 / Package | SKU: XTL-1020
/ Package | SKU: XTL-5700

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed