Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
Use your chainnose pliers to bend the tip just above the small circle at the top of the Vintage pendant (PND-7008) over. Gently squeeze the tip down on the back with your chainnose pliers (See Photo).Open a jump ring (FJR-5372) and link it through the loop of the pendant you just made. Close the jump ring.Take a dab of glue (XTL-1053) and place it on the back of the Austrian crystal crystal heart (SWBB-3703). This cement does NOT dry instantly -- you have at least 5 minutes to make adjustments before the glue starts to set. For maximum strength bond, allow 24-72 hours for complete curing. Next, lay the heart on top of the front of the brass pendant. It will fit nicely in the bottom part of the brass pendant as shown in the picture (See Photo). Next, take another small dab of glue with a toothpick and place it on the back of one of the brass daisys (BMB-4696). Lay the daisy on top of the Austrian crystal heart centering it over the hole. Now take a dab of glue with the toothpick and place on the back of the Austrian crystal flatback (SWF-11611). Place it in the center of the brass daisy you just glued on the heart.Open the loop of the earwire hook (FEA-6640). Link the jump ring from the finished earring component onto the loop. Close the loop. Repeat the steps above to make the second earring. You're finished!Please refer to photo for more detailed information about this project.
Tip: Check package quantities for each component. You may have extra material to make more than one finished project, or will have leftovers for other projects. In some cases, adding on just one more package of a component may be all you need to make multiple pieces.
All designs © Beadaholique Inc.
WHAT YOU'LL NEED: (scroll down for purchase options)
- PND-7008 -
Project uses 2 pieces. You will need 2 packages.
- FJR-5372 - Vintaj Natural Brass Jump Rings 7.25mm Open 16 Gauge (20)
Project uses 2 pieces. You will need 1 package.
- SWBB-3703 - Austrian crystal Pendant, 6240 Wild Heart, 17mm, 1 Piece, Crystal Copper
Project uses 2 pieces. You will need 2 packages.
- BMB-4696 - Vintaj Natural Brass Lovely 6mm Daisy Bead Caps (6)
Project uses 2 pieces. You will need 1 package.
- FEA-6640 - Vintaj Natural Brass Round Loop Ear Wire 25mm (2 Pair)
Project uses 2 pieces. You will need 1 package.
- SWF-11611 -
Project uses 2 pieces. You will need 1 package.
- XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
Project uses 1 piece. You will need 1 package.
For closed captions/subtitles, click the CC icon on the video player after starting the video.
Earn Reward Points with your purchase of project components or tools.