Retired - Josie Earrings

PROJECT E7035
Designer: Rachel Zaimont
Skill Level: Beginner
Dangling lengths of antiqued silver chain connect the front and back of these post earrings, creating a chic and edgy look. Plus, you won't have to worry about losing your earring backs!
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below you will make one earring. Repeat all instructions to make the second earring.
  1. Place a dab of E6000 glue into the bezel of one earring finding. Place one hematite faux pearl cabochon into the bezel and press it gently into the glue. Allow the glue to dry for several hours before proceeding.
  2. Using flush cutters, cut two lengths of antiqued silver chain: 2 inches and 3 inches.
  3. Open a jump ring. Slide it through the first link of both lengths of chain, and also slide it through the loop below the bezel on your earring finding. Close the jump ring.
  4. Open another jump ring. Slide it through the last link of both lengths of chain, and also slide it through one of the loops on one earring back. Close the jump ring.
  5. Enjoy your earrings!
Additional Information
Theme Under $20 - Designer Picks
Ingredients XTL-1054, CHA-9705, FEA-1010, FJR-3092,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.09 / Package | SKU: XTL-1054
Antiqued Silver Plated Rolo Chain, 2mm, by the Foot
You will need 1 package(s).
1 package = By The Foot.
$2.89 / Package | SKU: CHA-9705
Earring Backs, Earnuts with Medium Clutch 5.5mm, Surgical Steel (50 Pairs)
You will need 1 package(s).
1 package = 50 Pairs.
$4.05 / Package | SKU: FEA-1010
Antiqued Silver Plated Open Jump Rings 4.5mm 21 Gauge (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$1.49 / Package | SKU: FJR-3092
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.29 / Package | SKU: XTL-5514

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed