Retired - Man on the Moon Earrings

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Begin by sliding your glass bead followed by your astronaut bead, onto your ball head pin.
2. Once your beads are on, create a simple wire loop using your pliers. Snip off any excess wire using your flush cutters.
3. Then open up the loop in your earring hook (like you would a jump ring) and slide on your wire loop. Close the loop.
4. Your earring is done!

• BCP-31286 - Czech Fire Polished Glass Beads 12mm Round Prismatic Blue Hematite Multi (10)
  Project uses 2 pieces. You will need 1 package.


• FHP-3005 - Silver Plated Ball Head Pins 22 Gauge 1.5 Inch (x20)
  Project uses 2 pieces. You will need 1 package.


• FEA-3015 - Silver Plated Fishhooks Earring Hooks (50)
  Project uses 2 pieces. You will need 1 package.


• BWC-3028 - Glazed Ceramic Bead - Tiny Space Astronaut 8x17.5mm (2)
  Project uses 2 pieces. You will need 1 package.

• XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex