Retired - Neon Warrior Bracelet

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. To begin, cut your Soft Flex beading wire into seven separate strands, each one foot long. Secure one end of each strand using a Bead Stopper.
2. Have an extra bead stopper on hand to secure the opposite end of each strand once you have added the beads. Onto the first strand, thread the following 4mm colored gemstone beads:
3. one blue
4. one yellow
5. four orange
6. one pink
7. one blue
8. one yellow
9. one orange
10. one green
11. one pink
12. one blue
13. one yellow
14. one orange
15. one yellow
16. one blue
17. one pink
18. one green
19. one orange
20. one yellow
21. one blue
22. one pink
23. four orange
24. one yellow
25. one blue
26. Onto the second strand, thread the following 4mm colored gemstone beads:
27. one blue
28. one yellow
29. three orange
30. one pink
31. one blue
32. one yellow
33. one orange
34. one green
35. one pink
36. one blue
37. one yellow
38. three orange
39. one yellow
40. one blue
41. one pink
42. one green
43. one orange
44. one yellow
45. one blue
46. one pink
47. three orange
48. one yellow
49. one blue
50. Onto the third strand, thread the following 4mm colored gemstone beads:
51. one blue
52. one yellow
53. two orange
54. one pink
55. one blue
56. one yellow
57. one orange
58. one green
59. one pink
60. one blue
61. one yellow
62. five orange
63. one yellow
64. one blue
65. one pink
66. one green
67. one orange
68. one yellow
69. one blue
70. one pink
71. two orange
72. one yellow
73. one blue
74. Onto the fourth strand, thread the following 4mm colored gemstone beads:
75. one blue
76. one yellow
77. one orange
78. one pink
79. one blue
80. one yellow
81. one orange
82. one green
83. one pink
84. one blue
85. one yellow
86. three orange
87. one yellow
88. three orange
89. one yellow
90. one blue
91. one pink
92. one green
93. one orange
94. one yellow
95. one blue
96. one pink
97. one orange
98. one yellow
99. one blue
100. Onto the fifth strand, thread the following 4mm colored gemstone beads:
101. one blue
102. one yellow
103. two orange
104. one pink
105. one blue
106. one yellow
107. one orange
108. one green
109. one pink
110. one blue
111. one yellow
112. five orange
113. one yellow
114. one blue
115. one pink
116. one green
117. one orange
118. one yellow
119. one blue
120. one pink
121. two orange
122. one yellow
123. one blue
124. Onto the sixth strand, thread the following 4mm colored gemstone beads:
125. one blue
126. one yellow
127. three orange
128. one pink
129. one blue
130. one yellow
131. one orange
132. one green
133. one pink
134. one blue
135. one yellow
136. three orange
137. one yellow
138. one blue
139. one pink
140. one green
141. one orange
142. one yellow
143. one blue
144. one pink
145. three orange
146. one yellow
147. one blue
148. Onto the seventh and last strand, thread the following 4mm colored gemstone beads:
149. one blue
150. one yellow
151. four orange
152. one pink
153. one blue
154. one yellow
155. one orange
156. one green
157. one pink
158. one blue
159. one yellow
160. one orange
161. one yellow
162. one blue
163. one pink
164. one green
165. one orange
166. one yellow
167. one blue
168. one pink
169. four orange
170. one yellow
171. one blue.
172. Remove the bead stopper from one end of your bracelet, one strand at a time, and do the following to each strand: thread on a crimp tube, but do not crimp it yet. Thread the end of your beading wire though a closed 6mm jump ring, back through the crimp tube, and pull snug. Crimp the tube and trim off excess wire.
173. Once you have done this to each strand at one end of your bracelet, remove the bead stopper from the opposite end and do the same to each strand there.
174. Keeping your beaded strands in the same order, connect each strand to each loop on the clasp using a 6mm open jump ring.
175. Once all of your strands are attached to the clasp, add a crimp bead cover over each crimp tube, gently squeezing them closed with a pair of chain nose pliers after you have done so. You're all done making your fun new bracelet!

• FCL-4848 - 23K Gold Plated 7-Strand Box Clasp - Rectangle With Helix Design 18x40mm (1)
  Project uses 1 piece. You will need 1 package.


• SPJD-151 - Orange Hyacinth Candy Jade 4mm Round Beads / 16 Inch Strand
  Project uses 76 pieces. You will need 1 package.


• SPJD-133 - Neon Yellow Lemon Candy Jade 4mm Round Beads / 15.5 Inch Strand
  Project uses 43 pieces. You will need 1 package.


• SPJD-136 - Larimar Candy Jade 4mm Round Beads / 15.5 Inch Strand
  Project uses 40 pieces. You will need 1 package.


• SPJD-127 - Pink Candy Jade 4mm Round Beads / 15.5 Inch Strand
  Project uses 24 pieces. You will need 1 package.


• XCR-5193 - Soft Flex, 49 Strand Medium Beading Wire .019 Inch Thick, 30 Feet, Satin Silver
  Project uses 7 feet. You will need 1 package.


• FCR-1206 - Beadalon Gold Plated Crimp Tubes 1.5mm (65 Beads)
  Project uses 14 pieces. You will need 1 package.


• FCR-1091 - 22K Gold Plated Crimp Bead Covers 3mm (x50)
  Project uses 14 pieces. You will need 1 package.


• FJR-4122 - 22K Gold Plated Closed Jump Rings 6mm 18 Gauge (20)
  Project uses 14 pieces. You will need 1 package.


• FJR-5166 - 22K Gold Plated Open Jump Rings 6mm 18 Gauge (50)
  Project uses 14 pieces. You will need 1 package.

• XTL-3000 - Bead Stopper- Stop Beads Sliding Off Stringing Material
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose