Retired - The Pearl District

Name: Retired - The Pearl District
Brand: Beadaholique
SKU: B2006
Availability: OutOfStock

PROJECT B2006

Designer: Kat Silvia

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

Named for the Pearl District in Portland, this bracelet celebrates the unique coin pearls and organic look of the natural nut bicone beads.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

These instructions will give you a bracelet that is 8".

Cut 12" of beading wire.
On one end of your wire, thread the wire through a gold crimp tube and one end of the gold magnetic clasp. Thread the wire back down through the crimp bead and pull snug. You should have about two inches of beading wire slack on one side with your 10" on the other.
Crimp the crimp tube around the wire.
Now begin threading your beads: 3 nut beads, 1 pearl, 3 nut beads, 1 pearl, 3 nut beads, 1 pearl, 3 nut beads, 1 pearl, 3 nut beads, 1 pearl, 3 nut beads, 1 pearl, 3 nut beads, 1 pearl, 3 nut beads. 7 total pearls; 24 total nut beads.
At this time you will simply repeat the first instruction with the crimp bead and clasp on this side. Be sure to pull snug on the wire so the breads won't slide around too much.
Any excess wire you have can be threaded back through the bracelet, or trimmed.

WHAT YOU'LL NEED: (scroll down for purchase options)

BCP-12028 - Czech Glass Pearls - Round Coin Beads 10mm Diameter - Indian Sapphire (6 Pieces)
Project uses 7 pieces. You will need 2 packages.

BWD-0209 - Natural Betel Nut Bicone Beads - 8x5mm 16 Inch Strand
Project uses 24 pieces. You will need 1 package.

FCL-6807 - 22K Gold Plated Magnetic Clasps 6 x 4.5mm (4 Sets)
Project uses 1 piece. You will need 1 package.

FCR-1206 - Beadalon Gold Plated Crimp Tubes 1.5mm (65 Beads)
Project uses 2 pieces. You will need 1 package.

XCR-5143 - Soft Flex, 21 Strand Fine Beading Wire .014 Inch Thick, 30 Feet, Satin Silver
Project uses 12 inches. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
XTL-5230 - Double Notch Crimping Pliers - Works on 2mm And 3mm Crimps

Additional Information

Theme	Summer, Boho
Ingredients	BWD-0209, FCL-6807, FCR-1206, XCR-5143,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

Natural Betel Nut Bicone Beads - 8x5mm 16 Inch Strand

            Natural Betel Nut Bicone Beads - 8x5mm 16 Inch Strand
        
You will need 1 package(s).
1 package = 1 Strand.

                $5.39
            
             / Package | SKU: BWD-0209

Sold out

Magnetic Clasps, Round 6x4.5mm, 22K Gold Plated (1 Set)

            Magnetic Clasps, Round 6x4.5mm, 22K Gold Plated (1 Set)
        
You will need 1 package(s).
1 package = 1 Set.

                $1.19
            
             / Package | SKU: FCL-6807

Beadalon Crimp Beads, Tube 1.5mm, Gold Plated (65 Pieces)

            Beadalon Crimp Beads, Tube 1.5mm, Gold Plated (65 Pieces)
        
You will need 1 package(s).
1 package = 65 Pieces.

                $3.59
            
             / Package | SKU: FCR-1206

Soft Flex, 21 Strand Fine Beading Wire .014 Inch Thick, Satin Silver (30 Feet)

            Soft Flex, 21 Strand Fine Beading Wire .014 Inch Thick, Satin Silver (30 Feet)
        
You will need 1 package(s).
1 package = 1 Spool.

                $14.69
            
             / Package | SKU: XCR-5143