Retired - Romantic Sunrise Bracelet

Retired - Romantic Sunrise Bracelet
Like little rays of sunshine, the gold bead caps on this bracelet glisten beautifully, especially since hanging above them are sparkling Swarovski crystals. Romantic and delicate, this bracelet will warm your heart.
  • Project:B615
  • Skill Level:Beginner
  • Designer:Julie Bean
OR

Related Video

Instructions

  1. To begin, cut 11 inches of gold colored beading wire. Place a bead stopper on one end approx. 3 inches from the tail.
  2. String onto you beading wire 1 gold crimp tube (do not crimp). Next, string the following sequence 7 times: 1 Czech Glass 8mm bicone from you bead mix (choose the purple one or another color you prefer), 1 Czech glass druk 4mm round bead in olive picasso, 1 Swarovski 6mm bicone in rose water opal, and 1 Czech glass 4mm druk round bead in olive picasso. Add one more Czech Glass 8mm bicone from you bead mix. This will make for a 7 inch bracelet. If you would like to make a little longer bracelet, simply add some more beads at this time. After the last bead, string on another gold crimp tube.
  3. Now thread your beading wire through the first barrel of your gold wire protector, pull it over the arch way so that it lays in the groove and then back down through the other barrel. See this video here on how to use wire protectors. Thread onto your beading wire the loop at the base of your lobster clasp and pull the clasp over the wire protector so that it sits ontop of the archway. Now thread your beading wire back through the crimp tube and several beads next to it. Pull snug and crimp the bead.
  4. Go to the other side of your bracelet and repeat the same process from the step above with a 6mm jump ring to be used as the other half of your clasp. When completing this side, just make sure to pull your beading wire snug so that the beads lay flush next to each other on the strand (we just don't want large gaps).
  5. Take a head pin and thread onto it 1 gold cone flower bead cap (petals facing down) and 1 Swarovski 4mm bicone in lt. amethyst satin. Create a wrapped wire loop after the bead. Cut off excess wire with flush cutters. Make a total of 7 of these.
  6. Take another head pin and thread onto it 1 gold cone flower bead cap (petals facing down) and 1 Swarovski 4mm bicone in vintage rose. Create a wrapped wire loop after the bead. Cut off excess wire with flush cutters. Make a total of 7 of these.
  7. Take yet another head pin and thread onto it 1 gold cone flower bead cap (petals facing down) and 1 Czech fire polish 3mm bead in metallic gold matte. Create a wrapped wire loop after the bead. Cut off excess wire with flush cutters. Make a total of 7 of these.
  8. Now open a 6mm gold jump ring and link it around the space on your bracelet between the first Swarovski 6mm bicone in rose water opal and the second Czech glass druk bead in olive picasso that you strung. Before closing the jump ring, link onto it 1 of each of the types of dangles you made in the three previous steps. Close the jump ring.
  9. On the next sequence of beads that you strung, repeat the above step at the same juncture between the 6mm bicone and round druk. Repeat this pattern along the entire length of your bracelet. See photo on how these look.
  10. C'est Fini!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • XCR-67593 - Beadalon Wire Gold Color 7 Strand .015 Inch / 30Ft
    Project uses 11 inches. You will need 1 package.

  • FCR-04152 - 14K Gold Filled Wire & Thread Protectors .019 Inch Loops (10)
    Project uses 1 piece. You will need 1 package.

  • FCR-1206 - Beadalon Gold Plated Crimp Tubes 1.5mm (65 Beads)
    Project uses 2 pieces. You will need 1 package.

  • FHP-5219 - 22K Gold Plated Head Pins - 2 Inches Long/24 Gauge Wide (50 Pieces)
    Project uses 21 pieces. You will need 1 package.

  • BCP-74300 - Czech Glass Druk Round Beads 4mm Lt Olive Picasso (100)
    Project uses 14 pieces. You will need 1 package.

  • BCP-33200 - Czech Fire Polished Glass Beads 3mm Round Matte Metallic Gold (50)
    Project uses 7 pieces. You will need 1 package.

  • SWC-1675 -
    Project uses 7 pieces. You will need 1 package.

  • FJR-5260 - 22K Gold Plated 6mm 19 Gauge Open Jump Rings (100)
    Project uses 7 pieces. You will need 1 package.

  • BMB-6460 - 22K Gold Plated Cone Flower Bead Caps 6mm x 3.5mm (50)
    Project uses 21 pieces. You will need 1 package.

  • FCL-2509 - Beautiful Gold Plated Curved Lobster Clasps 8mm (10)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-3000 - Bead Stopper- Stop Beads Sliding Off Stringing Material
  • XTL-5200 - Standard Size Beading Crimping Pliers (For 2x2mm & 2x1mm Crimp Beads)
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex

Additional Information

Additional Information

Project Type Bracelet
Product Type Project
Technique Stringing
Designer Julie Bean
Skill Level Beginner
Project Status Retired
Ingredients BCP-33200, BCP-74300, BMB-6460, FCL-2509, FCR-04152, FCR-1206, FHP-5219, FJR-5260, SWC-1675, XCR-67593

Purchase Project Bundle:

A supplies bundle is no longer available for this project, but you may purchase individual components separately below. Please review project instructions carefully—some items may no longer be available for this project.

or Purchase Supplies Separately:

Retired - Romantic Sunrise Bracelet

22K Gold Plated 6mm 19 Gauge Open Jump Rings (100)

You will need 1 package(s).

1 package = 100 Pieces

$5.49
 / package  | SKU: FJR-5260
Retired - Romantic Sunrise Bracelet

Czech Glass Druk Round Beads 4mm Lt Olive Picasso (100)

You will need 1 package(s).

1 package = 100 Pieces

$2.45
 / package  | SKU: BCP-74300
Retired - Romantic Sunrise Bracelet

Beadalon Wire Gold Color 7 Strand .015 Inch / 30Ft

You will need 1 package(s).

1 package = 1 Spool

$6.99
 / package  | SKU: XCR-67593
Retired - Romantic Sunrise Bracelet

Beautiful Gold Plated Curved Lobster Clasps 8mm (10)

You will need 1 package(s).

1 package = 10 Pieces

$3.75
 / package  | SKU: FCL-2509

Out of stock

Retired - Romantic Sunrise Bracelet

14K Gold Filled Wire & Thread Protectors .019 Inch Loops (10)

You will need 1 package(s).

1 package = 10 Pieces

$3.49
 / package  | SKU: FCR-04152
Retired - Romantic Sunrise Bracelet

Beadalon Gold Plated Crimp Tubes 1.5mm (65 Beads)

You will need 1 package(s).

1 package = 65 Pieces

$2.49
 / package  | SKU: FCR-1206
Retired - Romantic Sunrise Bracelet

22K Gold Plated Cone Flower Bead Caps 6mm x 3.5mm (50)

You will need 1 package(s).

1 package = 50 Pieces

$2.75
 / package  | SKU: BMB-6460
Retired - Romantic Sunrise Bracelet

Czech Fire Polished Glass Beads 3mm Round Matte Metallic Gold (50)

You will need 1 package(s).

1 package = 50 Pieces

$2.09
 / package  | SKU: BCP-33200
Retired - Romantic Sunrise Bracelet

22K Gold Plated Head Pins - 2 Inches Long/24 Gauge Wide (50 Pieces)

You will need 1 package(s).

1 package = 50 Pieces

$2.65
 / package  | SKU: FHP-5219

Tools:

Retired - Romantic Sunrise Bracelet

Beadsmith Jewelry Fine Round Nose Micro Pliers

$6.99
 / package  | SKU: XTL-5514
Retired - Romantic Sunrise Bracelet

Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex

$13.75
 / package  | SKU: XTL-5600
Retired - Romantic Sunrise Bracelet

Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

$6.99
 / package  | SKU: XTL-5511
Retired - Romantic Sunrise Bracelet

Bead Stopper- Stop Beads Sliding Off Stringing Material

$6.99
 / package  | SKU: XTL-3000
Newsletter
Join us, for news, updates, special deals, discounts and everything beads.