Retired - Urban Chic Necklace

Retired - Urban Chic Necklace
This necklace is a play on shapes as it goes from larger SWAROVSKI ELEMENTS crystal faux pearls to smaller ones and then back to larger ones again. Accenting the faux pearls, and adding a structural element to the design, are black finish hourglass-shaped strand spacers by Tierracast.
  • Project:N676
  • Skill Level:Beginner
  • Designer:Julie Bean
OR

Related Video

Instructions

  1. Start by cutting a 30 inch piece of black beading wire. Place a bead stopper 3 inches from the end.
  2. Place onto the beading wire:
  3. 1 gunmetal crimp bead
  4. 24 SWAROVSKI ELEMENTS crystal faux pearls 3mm in opaque jade green
  5. 7 SWAROVSKI ELEMENTS crystal faux pearls 4mm in opaque jade green
  6. 13 SWAROVSKI ELEMENTS crystal faux pearls 5mm in opaque jade green
  7. Next place onto your strand:
  8. 1 Tierracast black finish pewter 2-hole hourglass strand spacer
  9. 1 SWAROVSKI ELEMENTS crystal faux pearl 5mm in opaque jade green.
  10. Repeat this sequence 15 times (so you will have a total of 16 of these 2-hole strand spacers with a 5mm bead between each strung onto your strand).
  11. Next place onto your strand:
  12. 12 SWAROVSKI ELEMENTS crystal faux pearls 5mm in opaque jade green
  13. 7 SWAROVSKI ELEMENTS crystal faux pearls 4mm in opaque jade green
  14. 24 SWAROVSKI ELEMENTS crystal faux pearls 3mm in opaque jade green
  15. 1 gunmetal crimp bead
  16. Place another bead stopper on this end.
  17. Cut another 30 inch piece of black beading wire. Place a bead stopper 3 inches from the end.
  18. Place onto the beading wire:
  19. 1 gunmetal crimp bead
  20. 18 SWAROVSKI ELEMENTS crystal faux pearls 4mm in opaque jade green
  21. 4 SWAROVSKI ELEMENTS crystal faux pearls 5mm in opaque jade green
  22. 12 SWAROVSKI ELEMENTS crystal faux pearls 6mm in opaque jade green
  23. Now string your beading wire through the 2nd hole of one of the end Tierracast black finish pewter 2-hole hourglass strand spacers already strung on your first beaded strand (the one with bead stoppers now on each end). Next string on another SWAROVSKI ELEMENTS crystal faux pearl 6mm in opaque jade green. Repeat this step until you have a total of 4 6mm faux pearls between the strand spacers. Next string a total of 7 SWAROVSKI ELEMENTS crystal faux pearls 8mm in opaque jade green between the strand spacers. See photo. Now string on 4 more SWAROVSKI ELEMENTS crystal faux pearls 6mm in opaque jade green between the strand spacers. Now string 12 SWAROVSKI ELEMENTS crystal faux pearls 6mm in opaque jade green, 4 SWAROVSKI ELEMENTS crystal faux pearls 5mm in opaque jade green, 18 SWAROVSKI ELEMENTS crystal faux pearls 4mm in opaque jade green, and a gunmetal crimp bead. Place a bead stopper at the end.
  24. Lay your necklace out on the table so that you have the curve down at the bottom and the two strands of beads on each side laid out flat, untangled, and ready to be secured onto your strand reducers. See photo.
  25. Take one of your Tierracast black finish pewter 2 strand reducer bead bars, remove the bead stopper from one of your strand ends, loop the beading wire through one of the bottom holes on the strand reducer, go back through the crimp bead and several beads next to it, and then crimp the crimp bead. Cut of excess beading wire with your flush cutters. Repeat this step for the other beaded strand on this side of the necklace, securing it to the other hole at the bottom of the strand reducer.
  26. Go to the other side of your necklace and repeat this step, but be cautious to pull your wires snug so that there are no gaps between your beads and they form a nice curve down at the bottom where the Tierracast bead spacers are.
  27. Almost done!
  28. Cut a 22" piece of black beading wire. Place a bead stopper 3 inches from the end. Place onto this beading wire 1 gunmetal crimp bead, 1 3mm faux pearl, 1 6mm faux pearl, 1 Tierracast black finish pewter 4mm faceted cube spacer bead, another 6mm faux pearl, another 4mm cube spacer bead, 2 6mm faux pearls, another 4mm spacer bead, 5 6mm faux pearls, a 6mm cube spacer bead, 18 8mm faux pearls, a 6mm cube spacer bead, 5 6mm faux pearls, another 4mm spacer bead, 2 6mm faux pearls, another 4mm cube spacer bead, another 6mm faux pearl, another 4mm faceted cube spacer bead, a 6mm faux pearl, a 3mm faux pearl, and a gunmetal crimp bead.
  29. Secure the wire end to the top loop of your strand reducer via the crimp bead. Crimp the bead. Go to the other side of your strand, remove the bead stopper, and secure this end to the other strand reducer (again via the crimp bead attaching it to the top loop). Crimp the bead and cut off any excess wire with flush cutters.
  30. All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FCR-1253 - Gun Metal Brass Crimp Beads 2mm x 1.5mm (100)
    Project uses 6 pieces. You will need 1 package.

  • XCR-67553 - Beadalon Wire Black 7 Strand .015 Inch / 30Ft
    Project uses 7 feet. You will need 1 package.

  • BMB-5660 - TierraCast Black Finish Pewter Lead-Free 2 Hole Hourglass Strand Spacer Beads 18.5mm (2)
    Project uses 16 pieces. You will need 8 packages.

  • BMB-3155 - TierraCast Black Finish Lead-Free Pewter 4mm Faceted Cube Spacer Beads (4)
    Project uses 6 pieces. You will need 1 package.

  • SWP-3090 - Swarovski Crystal, 5810 Round Faux Pearl Beads 3mm, 50 Pieces, Jade
    Project uses 50 pieces. You will need 1 package.

  • SWP-6090 - Swarovski Crystal, 5810 Round Faux Pearl Beads 6mm, 50 Pieces, Jade
    Project uses 50 pieces. You will need 1 package.

  • SWP-4090 - Swarovski Crystal, 5810 Round Faux Pearl Beads 4mm, 50 Pieces, Jade
    Project uses 50 pieces. You will need 1 package.

  • SWP-8090 - Swarovski Crystal, 5810 Round Faux Pearl Beads 8mm, 25 Pieces, Jade
    Project uses 25 pieces. You will need 1 package.

  • FCO-3705 - TierraCast Black Finish Lead-Free Pewter 2-Strand Reducer Bead Bars 10.6mm (2)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5200 - Standard Size Beading Crimping Pliers (For 2x2mm & 2x1mm Crimp Beads)
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-3000 - Bead Stopper- Stop Beads Sliding Off Stringing Material

Additional Information

Additional Information

Project Type Necklace
Product Type Project
Technique Stringing
Designer Julie Bean
Skill Level Beginner
Project Status Retired
Ingredients BMB-3155, BMB-5660, FCO-3705, FCR-1253, SWP-3090, SWP-4090, SWP-6090, SWP-8090, XCR-67553

Purchase Project Bundle:

A supplies bundle is no longer available for this project, but you may purchase individual components separately below. Please review project instructions carefully—some items may no longer be available for this project.

or Purchase Supplies Separately:

Retired - Urban Chic Necklace

Gun Metal Brass Crimp Beads 2mm x 1.5mm (100)

You will need 1 package(s).

1 package = 100 Pieces

$6.99
 / package  | SKU: FCR-1253
Retired - Urban Chic Necklace

Swarovski Crystal, #5810 Round Faux Pearl Beads 6mm, 50 Pieces, Jade

You will need 1 package(s).

1 package = 50 Pieces

$4.75
 / package  | SKU: SWP-6090
Retired - Urban Chic Necklace

TierraCast Black Finish Lead-Free Pewter 4mm Faceted Cube Spacer Beads (4)

You will need 1 package(s).

1 package = 4 Pieces

$1.59
 / package  | SKU: BMB-3155
Retired - Urban Chic Necklace

Beadalon Wire Black 7 Strand .015 Inch / 30Ft

You will need 1 package(s).

1 package = 1 Spool

$2.99
 / package  | SKU: XCR-67553
Retired - Urban Chic Necklace

Swarovski Crystal, #5810 Round Faux Pearl Beads 8mm, 25 Pieces, Jade

You will need 1 package(s).

1 package = 25 Pieces

$4.75
 / package  | SKU: SWP-8090
Retired - Urban Chic Necklace

Swarovski Crystal, #5810 Round Faux Pearl Beads 3mm, 50 Pieces, Jade

You will need 1 package(s).

1 package = 50 Pieces

$3.49
 / package  | SKU: SWP-3090
Retired - Urban Chic Necklace

TierraCast Black Finish Lead-Free Pewter 2-Strand Reducer Bead Bars 10.6mm (2)

You will need 1 package(s).

1 package = 2 Pieces

$1.99
 / package  | SKU: FCO-3705
Retired - Urban Chic Necklace

Swarovski Crystal, #5810 Round Faux Pearl Beads 4mm, 50 Pieces, Jade

You will need 1 package(s).

1 package = 50 Pieces

$3.99
 / package  | SKU: SWP-4090
Retired - Urban Chic Necklace

TierraCast Black Finish Pewter Lead-Free 2 Hole Hourglass Strand Spacer Beads 18.5mm (2)

You will need 8 package(s).

1 package = 2 Pieces

$2.35
 / package  | SKU: BMB-5660

Tools:

Retired - Urban Chic Necklace

Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex

$13.75
 / package  | SKU: XTL-5600
Retired - Urban Chic Necklace

Bead Stopper- Stop Beads Sliding Off Stringing Material

$6.99
 / package  | SKU: XTL-3000
Newsletter
Join us, for news, updates, special deals, discounts and everything beads.