Retired - Victorian Stunner

PROJECT R602
Designer: Julie Bean
Skill Level: Beginner
An impressive Victorian-inspired adjustable filigree ring with a stunning Austrian crystal rivoli in the center. Easy to make and gorgeous to wear.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. If you do not already know your ring size, measure it using a ring sizer or go to a jewelry store and ask them to measure your finger. There is usually no charge for this. This ring is adjustable, so you will have some room to work with.
  2. Find the corresponding number on the ring mandrel as your ring size. Line the mid point of the filigree width with that number on the mandrel. Using the pressure of your fingers, mold the filigree around the mandrel to form the ring.
  3. Place your Austrian crystal rivoli in the center of your bead cap and press the bead cap petals around the crystal, making a setting.
  4. Cut 6" of 26 gauge wire. Fold in half. Going from the underside of the ring, thread the wire through two adjacent holes in the middle of the ring. Pull through to the other side (the top side). Thread one end of wire through the bottom of your Austrian crystal bead cap setting and pull out the other side, do the same with the other end of wire but come from the opposite side. Pull snug so that the crystal setting is tight against the top of the filigree. If you want to add a little stability, loop each end of wire in and out several underside filigree holes, just make sure your wire ends come out the top and do not do more then one or two of these securings.
  5. Now take one end of wire and wind it around the base of your bead cap setting until you run out of wire. Do the same with the other end of wire, but wind in the opposite direction.
  6. To see this project from start to finish, watch the video.
  7. Enjoy!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PND-7015 - Vintaj Natural Brass Diamond Trellis Filigree Stamping 64x21mm (1)
    Project uses 1 piece. You will need 1 package.

  • BMB-4253 - Vintaj Natural Brass Fancy 16mm Filigree Bead Caps (4)
    Project uses 1 piece. You will need 1 package.

  • WCR-4208 - BeadSmith Non-Tarnish Antique Brass Color Copper Craft Wire 26 Gauge - 30 Yards
    Project uses 6 inches. You will need 1 package.

  • SWC-9305 - Austrian Crystal, 1122 Rivoli Fancy Stones 12mm, 4 Pieces, Silk Sf
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-0152 - Deluxe Aluminum Ring Sizing Mandrel Wire Wrapping Tool Sizes 2-15
Additional Information
Theme Vintage Look
Ingredients BMB-4253, WCR-4208,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
You will need 1 package(s).
1 package = .
/ Package | SKU: BMB-4253
The Beadsmith Non-Tarnish Antique Brass Color Copper Craft Wire 26 Gauge - 30 Yards
You will need 1 package(s).
1 package = 1 Spool.
$6.45 / Package | SKU: WCR-4208
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed