Retired - Vinyasa Necklace

PROJECT N7020
Designer: Rachel Zaimont
Skill Level: Intermediate
A small, stoic Buddha centers this necklace, in which glittering red glass beads and faceted pyrite beads frame brass-finish TierraCast charms set with tiny faux opals.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

In addition to the materials listed above, you will also need a toothpick. These instructions will make an 18 inch necklace, but the necklace extender adds on an optional extra 2 inches.
  1. Take one TierraCast brass finish glue-in charm and place a dab of E6000 glue into the bezel with a toothpick. Then place one faux opal cabochon into the bezel and press it gently into the glue.
  2. Repeat step 1 with the second brass glue-in charm and the second faux opal cabochon. Set both charms aside to let the glue dry overnight.
  3. Using your flush cutters, cut a 24 inch length of black Beadalon beading wire.
  4. String one crimp tube about 1 inch from the end, followed by one brass jump ring. Take the end of the wire back through the crimp tube and pull snug. Crimp the crimp tube using your crimping pliers. Snip off the excess wire with flush cutters.
  5. Add a crimp cover over your crimp tube.
  6. Begin stringing your beads in the following order: 5 red glass rondelles, 10 pyrite beads, 50 red glass rondelles. Then string 2 pyrite beads, followed by the loop of one TierraCast bezel charm with the faux opal glued in, then 2 pyrite beads. Add 5 red glass rondelles. Then string 2 pyrite beads, followed by the loop of the TierraCast Buddha charm, then 2 pyrite beads. Add 5 red glass rondelles. Then string 2 pyrite beads, followed by the loop of the second TierraCast bezel charm with the faux opal glued in, then 2 pyrite beads. Then add 50 red glass rondelles, 10 pyrite beads, and 5 more red glass rondelles.
  7. Once all of your beads are on, string another crimp tube, followed by another brass jump ring. Take your wire back through the crimp tube and pull snug. Crimp the crimp tube using your crimping pliers. Snip off the excess wire with flush cutters.
  8. Add a crimp cover over your crimp tube.
  9. Using your pliers, open the jump ring at one end of your necklace. Slide on the loop of an antiqued brass lobster clasp. Close the jump ring.
  10. Open the jump ring at the other end of your necklace. Slide on the last link of one antiqued brass necklace extender. Close the jump ring.
  11. Enjoy your necklace!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PND-0787 - TierraCast Pewter Charm, Round Buddha Silhouette 16.5x11.5mm, 1 Piece, Brass Oxide Finish
    Project uses 1 piece. You will need 1 package.

  • PND-09115 - TierraCast Pewter Glue-In Charm, Round Smooth Edge 16.5x11.5mm, 1 Piece, Brass Oxide Finish
    Project uses 2 pieces. You will need 2 packages.

  • SPCB-7001 - Faux Red Opal Foil Glass Cabochon Round 7mm (2)
    Project uses 2 pieces. You will need 1 package.

  • BGL-08001 - Simulated Ruby Glass Beads, 2.5X3.5mm Faceted Rondelles, 15.5 Inch Strand, Ruby Red
    Project uses 120 pieces. You will need 1 package.

  • SPPY-202 - Pyrite Gemstone Beads, Faceted Rondelles 3x4mm, 13 Inch Strand, Gold
    Project uses 32 pieces. You will need 1 package.

  • FJR-5179 - Antiqued Brass Open Jump Rings 7mm 18 Gauge (50)
    Project uses 2 pieces. You will need 1 package.

  • FCR-1090 - Antiqued Brass Crimp Bead Covers 3mm (50)
    Project uses 2 pieces. You will need 1 package.

  • FCR-1255 - Beadsmith Black Ox / Gunmetal Crimp Tube Beads 2x2mm (100)
    Project uses 2 pieces. You will need 1 package.

  • FCL-4711 - Antiqued Brass Curved Lobster Clasps 12mm (10)
    Project uses 1 piece. You will need 1 package.

  • AXC-91001 - Antiqued Brass 5mm Chain Necklace Extender W/ Drop 2 Inch (5)
    Project uses 1 piece. You will need 1 package.

  • XCR-67553 - Beadalon Wire Black 7 Strand .015 Inch / 30Ft
    Project uses 24 inches. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5514 - Beadsmith Jewelry Fine Round Nose Micro Pliers
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5200 - Standard Size Beading Crimping Pliers (For 2x2mm & 2x1mm Crimp Beads)
Additional Information
Theme Yoga, Boho
Ingredients PND-0787, PND-09115, SPCB-7001, SPPY-202, FCR-1090, FCR-1255, AXC-91001, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
TierraCast Pewter Charm, Round Buddha Silhouette 16.5x11.5mm, Brass Oxide Finish (1 Piece)
You will need 1 package(s).
1 package = 1 Piece.
$1.29 / Package | SKU: PND-0787
TierraCast Pewter 7mm ss34 Bezel Charm, Round Smooth Edge 16.5mm, 1 Piece, Brass Oxide Finish
You will need 2 package(s).
1 package = 1 Piece.
$1.49 / Package | SKU: PND-09115
Faux Red Opal Foil Glass Cabochon Round 7mm (2 pcs)
You will need 1 package(s).
1 package = 2 Pieces.
$2.69 / Package | SKU: SPCB-7001
Gemstone Beads, Pyrite, Faceted Rondelle 3x4mm, Gold (13 Inch Strand)
You will need 1 package(s).
1 package = 1 Piece.
$9.05 / Package | SKU: SPPY-202
Crimp Bead Covers, 3mm, Antiqued Brass (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$3.75 / Package | SKU: FCR-1090
The Beadsmith Crimp Beads, Tube 2x2mm, Black Ox / Gunmetal (100 Pieces)
You will need 1 package(s).
1 package = 100 Pieces.
$1.99 / Package | SKU: FCR-1255
Necklace Chain Extender, 5mm Curb Links with Drop 2 Inches, Antiqued Brass (5 Pieces)
You will need 1 package(s).
1 package = 5 Pieces.
$4.15 / Package | SKU: AXC-91001
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.09 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jewelry Fine Round Nose Micro Pliers
$6.29 / Package | SKU: XTL-5514

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed